Operation
45
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be
sure you have made a correct connection to the projector audio input. See
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
• Using the remote control
Press
MUTE
to temporarily turn off the sound. While the sound is off, the screen will
display
in the upper right corner of the screen.
To restore the sound, press
MUTE
again.
• Using the OSD menu
1.
Press
MENU/EXIT
and then press
◄
/
►
until the
System Setup: Advanced
menu is highlighted.
2.
Press
▼
to highlight
Audio Settings
and press
MODE/ENTER
.
The
Audio Settings
page displays.
3.
Highlight
Mute
and press
◄
/
►
to select
On
.
4.
To restore the sound, repeat steps 1-3 and press
◄
/
►
to select
Off
.
Adjusting the sound level
To adjust the sound level,
• Using the remote control
Press
or
to select a desired sound level.
• Using the OSD menu
1.
Repeat steps 1-2 above.
2.
Press
▼
to highlight
Volume
and press
◄
/
►
to select a desired sound level.
Turning off the Power on/off ring tone
1.
Repeat steps 1-2 above.
2.
Press
▼
to highlight
Power on/off ring tone
and press
◄
/
►
to select
Off
.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.
INPUT SOURCE
AUDIO IN
AUDIO OUT
Computer
mini jack
mini jack
HDMI/MHL
HDMI/MHL
mini jack
VIDEO
RCA
mini jack
S-VIDEO
RCA
mini jack
