Operation
57
4. System
Setup: Basic men
u
Operation
Setting
Direct Power On
Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER
or
ON
when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See
"Setting Auto Power Off" on page 63
for details.
Quick Cooling
Enables or disables the
Quick Cooling
function.
Selecting
On
enables the function and the projector cooling time
will be shortened from a normal 90 second duration to
approximately 2 seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Instant Restart
Selecting
On
enables you to restart the projector immediately
within 90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Panel Key Lock
Disables or enables all panel key functions except
POWER
on
the projector and keys on the remote control. See
for details.
Background
Color
Selects background appearance when there is no signal.
Splash Screen
Allows you to select which logo screen will appear during projector
start-up.
PointWrite
Touch Module
Disable or enables "Type A connector" 5V power output for
PointWrite Touch Module.
FUNCTION
DESCRIPTION
