BenQ MW707, User Manual

Page: 14 / 47

14 Positioning your projector
MW707
• The screen aspect ratio is 16:10 and the projected picture is in a 16:10 aspect ratio
For example, if you are using a 120-inch screen, the recommended projection distance is 3593 mm.
If your measured projection distance is 3000 mm, the closest match in the
"Projection distance (mm)"
column is 2994 mm. Looking across this row shows that a 100'' (about 2.5 m) screen is required.
Mounting the projector
If you intend to mount your projector, we strongly recommend that you use a proper fitting BenQ
projector mounting kit and that you ensure it is securely and safely installed.
If you use a non-BenQ brand projector mounting kit, there is a safety risk that the projector may fall
down due to an improper attachment through the use of the wrong gauge or length screws.
Before mounting the projector
• Purchase a BenQ projector mounting kit from the place you purchased your BenQ projector.
• BenQ recommends that you also purchase a separate Kensington lock compatible security cable and
attach it securely to both the Kensington lock slot on the projector and the base of the mounting
bracket. This will perform the secondary role of restraining the projector should its attachment to the
mounting bracket become loose.
Screen size Projection distance (mm)
Offset (mm) Diagonal
W (mm) H (mm)
Min length
Average
Max length
Inch mm (max. zoom) (min. zoom)
60 1524 1292 808 1564 1796 2029 81
70 1778 1508 942 1824 2096 2367 94
80 2032 1723 1077 2085 2395 2705 108
90 2286 1939 1212 2346 2695 3044 121
100 2540 2154 1346 2606 2994 3382 135
110 2794 2369 1481 2867 3293 3720 148
120 3048 2585 1615 3128 3593 4058 162
130 3302 2800 1750 3388 3892 4396 175
140 3556 3016 1885 3649 4192 4734 189
150 3810 3231 2019 3909 4491 5073 202
160 4064 3446 2154 4170 4790 5411 215
170 4318 3662 2289 4431 5090 5749 229
180 4572 3877 2423 4691 5389 6087 242
All measurements are approximate and may vary from the actual sizes.
BenQ recommends that if you intend to permanently install the projector, you should physically test the projection
size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this
projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your
installation location.
H
W
Projection distance
Center of lens
Screen
16:10 Screen diagonal
Offset