10 Introduction
Controlling your smart device with the remote control
When the projector projects the content
from your MHL compatible smart device,
you can use the remote control to
control your smart device.
To enter the MHL mode, press and hold
AUTO
for 3 seconds. The following
buttons are available for controlling your
smart device:
Arrow keys (
, , ,
)
,
MENU, BACK, OK
.
To leave the MHL mode, press and hold
AUTO
for 3 seconds.
8.
SOURCE
Displays the source selection bar.
9. Source selection button:
PC 1
Selects
PC 1
input source for display.
10. Source selection button:
HDMI
Press this button repeatedly to select
HDMI
1
or
HDMI 2
input source for display.
11.
ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or
even cause a fire.
12.
PAGE
/
PAGE
Operate your display software program (on a
connected PC) which responds to page
up/down commands (like Microsoft
PowerPoint).
13.
SMART ECO
Displays the
Light Mode
menu for selecting a
suitable lamp operating mode.
14.
FREEZE
Freezes the projected image.
15.
ASPECT
Selects the display aspect ratio.
16.
Volume keys
/
Decreases or increase the projector volume.
17.
ZOOM+
/
ZOOM-
Magnifies or reduces the projected picture
size.
18.
QUICK INSTALL
Quickly selects several functions to adjust the
projected image and displays the test pattern.
19.
Toggles projector audio between on and off.
When the projector is under MHL mode, the keypad on the projector should be with the same definition of the keys
on the remote control.
