Operation
32
Fine-tuning the image quality in user modes
According to the detected signal type and selected picture mode, some of the below
functions may not be available. Based on your needs, you can make adjustments to these
functions by highlighting them and pressing
/
on the projector or remote control.
Adjusting
Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting
Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting
Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting
Tint
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
Adjusting
Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
Adjusting
Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in picture. It enables a
greater than 50% brightness increase in mid-tone images, which are common in video and
natural scenes, so the projector reproduces images in realistic and true colors. If you
prefer images with that quality, select
On
. If you don’t need it, select
Off
.
When
Off
is selected, the
Color Temperature
function is not available.
Selecting a
Color Temperature
The options available for color temperature settings vary according to the signal type
selected.
1.
Cool:
Makes images appear bluish white.
2.
Normal:
Maintains normal colorings for white.
3.
Warm:
Makes images appear reddish white.
Setting a preferred color temperature
To set a preferred color temperature:
1.
Highlight
Color Temperature
and select
Warm
,
Normal
or
Cool
by pressing
/
on the projector or remote control.
2.
Press
to
highlight
Color Temperature Fine Tuning
and press
OK
. The
Color Temperature Fine Tuning
page appears.
+50
+30
+70
0
-30
+30
