Operation
43
Function
Description
Standby
Settings
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
for how to
make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press /
to
choose the source that you wish to use. When you select Computer,
audio signal can only be fed into the AUDIO-IN jack. When you select
Video,S-Video, audio signal can only be fed into the AUDIO-IN L/R
jacks. There is no need to connect the audio cable when HDMI is
selected since the HDMI cable carries audio signal.
See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 1, User
2, Color Space Conversion, Projector Position, High Altitude Mode,
Security Settings and Baud Rate.
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format: NTSC, PAL, SECAM, YUV, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
5. S
YSTEM
SETUP: Advanced menu
6. I
N
FOR
M
A
T
ION
menu
