BenQ MP722ST, User Manual

Page: 33 / 69

Operation 33
6. Press to select a menu item to be changed and adjust the value with //// . See
"Fine-tuning the image quality in user modes" below for details.
7. When all settings have been done, highlight Save Settings Save Settings Save Settings Save Settings and press Mode/Enter Mode/Enter Mode/Enter Mode/Enter to
store the settings.
8. The confirmation message “Setting Saved Setting Saved Setting Saved Setting Saved” displays.
Fine-tuning the image quality in user modes
Fine-tuning the image quality in user modes Fine-tuning the image quality in user modes
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when User 1
User 1 User 1 User 1 or User 2 User 2 User 2 User 2 is selected. Based on your needs, you can make adjustments to these
functions by highlighting them and pressing / on the projector or remote control.
Adjusting
Adjusting Adjusting
Adjusting Brightness
Brightness Brightness
Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Adjusting Adjusting Adjusting Contrast Contrast Contrast Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting Adjusting Adjusting Adjusting Color Color Color Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting
Adjusting Adjusting
Adjusting Tint
Tint Tint
Tint
The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.
Adjusting
Adjusting Adjusting
Adjusting Sharpness
Sharpness Sharpness
Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
+50
+30
+70
+50
+30
+70