BenQ MK2443, Quick Start Manual, Page: 39 / 64

En
gli
sh
36 OSD (On-Screen Display) menu
Item Function Operation Range
Aspect
Ratio
Selects through Wide mode settings.
Press
◄
or
►
to change
selection.
• Full
• Zoom1
• Zoom2
• Panorama
• Auto
• 4:3
• Under Scan
HDMI
RGB Range
Selects HDMI RBG Range from Full or Standard
(Only Under HDMI source with RGB input color
space).
• Full
• Standard
Senseye
To set ACE, Noise Reduction, Skin Tone and DCR.
ACE
Advance contrast enhance. (Standard, Low, Off,
High)
Press
◄
or
►
to
change selection
or make
adjustment.
• Standard
• High
• Off
• Low
Noise
Reduction
Select to reduce the noise level of connected
equipment.
• Auto
• Off
• Low
• Standard
• High
Skin Tone Skin Color adjust. (0-10) 0 to 10
DCR
To turn on/off the DCR (Dynamic Contrast Ratio)
function.
• On
• Off
Auto
Adjust
Press the OK button to automatically adjust the
display settings to optimize performance based on
the VGA mode.
Press OK
H-Position
Adjusts the position of the picture left and right in
the window based on the VGA mode.
Press ◄ or
► to change
selection.
0 to 100
V-Position
Adjusts the position of the picture up and down in
the window based on the VGA mode.
0 to 100
Size
Controls the width of the picture based on the VGA
mode.
-30 to +30
Phase
Controls the signal phase, which can improve
focus clarity and image stability based on the VGA
mode.
0 to 100
*Auto Adjust, H-Position, V-Position, Size, and Phase selections will only appear in VGA input
source.