BenQ MK2443, Quick Start Manual, Page: 31 / 64

En
gli
sh
28 Connecting video and audio signals
Connecting the PC input
1. Connect the VGA output of your PC to the VGA IN terminal on the TV using a mini
D-Sub (15-pin) cable (not provided).
2. Connect the audio output of your PC to the TV's VGA LINE IN terminal using an
appropriate 3.5mm-diameter Mini-jack stereo audio cable (not provided).
To view video image from this input, press
INPUT
and use ▲▼ button to select
VGA
then press
OK
button.

When you connect the display to a PC, you should adjust the resolution in the display properties
of the computer to closely match the native resolution of the display (for example, 1680 x 1050
pixels). See "Supported PC (D-Sub/DVI) input signal resolutions" on page 55 on other supported
resolutions.
PC
Audio cable
Mini D-Sub cable
Connecting the S-Video input
1. Connect the S-Video output jack on your output equipment to the S-VIDEO jack on
your display using an S-Video cable (not provided). Pay attention to the pins in the
plugs when inserting so to keep the pins from bending.
2. Connect the S-Video audio output jack of the output equipment to the AUDIO L/R
input jacks using a suitable audio cable (or a composite video cable. In this case, the
yellow plug will not be used).
To view video image from these inputs, press INPUT and use
▲▼
button to select
S-Video
then press
OK
button.

You should not connect both a composite Video and an S-Video from the same device; just one or
the other. If you have the choice, use the S-Video instead of composite Video as an S-video signal
provides a higher quality signal to that of composite Video.
DVD Player
Audio cable
S-Video cable