BenQ MK2443, Quick Start Manual, Page: 12 / 64

En
gli
sh
Section 1: Quick Start Guide 9
Using the remote control
1. Point and aim the top front of the remote control
directly at the display when pressing the buttons.
2. The remote control must be held at an angle
within 30 degrees of the display's remote control
sensor window to function correctly. The
distance between the remote control and the
sensors should not exceed 5 meters.
3. Do not cover the sensor window on the front of
the display (below the power indicator lamp), or
place objects in front of it which will block the
direct line of sight between the remote control
and the sensor window on the display.

• Do not let the remote control become wet, or
place it in humid environments (like bathrooms.)
• If the remote control sensor window on the
display is in direct sunlight or strong light, the
remote control may not operate properly. In this
situation, change the light source or readjust
the angle of your display, or operate the remote
control from a location closer to the remote
control sensor window on the display.