English
67
Note:
Do not wash the filter with the water or other liquid matter.
Resetting the filter timer
6.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM
SETUP: Basic > Operation Settings > Filter Settings
menu. Press
ENTER
. The Filter
Settings page displays. Highlight
Reset Filter Timer
. A warning message displays asking if you
want to reset the filter timer. Highlight
Reset
and press
ENTER
. The filter time will be reset
to '0'.
1. Turn off the projector and unplug the power
cord from the outlet. Remove any dust on
the projector and around the air vents.
Loosen the two captive screws that secure
the filter cover.
2.
Remove the filter module from the
projector.
3.
Replace the new filter module with the filter
cover.
4.
Replace the filter cover into the projector
by pushing gently in the direction shown.
5. Tighten the screws.
Replacing the front filter
