40 Menu
operation
4. Main menu:
Installation
Structure
Function descriptions
Menu
Options
Projector Position
Front/Front Ceiling/Rear/Rear Ceiling
3D Keystone
H: -40 – +40
V: -40 – +40
R: -40 – +40
Auto Vertical Keystone
Off/On
12V Trigger
Off/On
Test Pattern
On/Off
High Altitude Mode
On
/
Off
Serial Port Setting
Port Selection
RS232/HDBaseT
Baud Rate
9600/14400/19200/38400/57600/115200
Corner Fit
0~60
Image Resizing
Digital Zoom
1.0X – 1.8X/2.0X
Digital Shrink & Shift
0.75X~1.0X
Blanking
Modes of Adjustment
Top
Bottom
Left
Right
Warping
Enable
On
/
Off
Warping Pattern
5x3/10x5/15x9/24x15
Warping Background
Warping Correction
Reset
Reset/Cancel
Image Memory
Save Image Memory
Memory-1/Memory-2/Memory-3/
Memory-4/Memory-5
Apply Image Memory
Rename
Menu
Descriptions
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See
Choosing a location on page 10
for details.
3D Keystone
See
Correcting keystone on page 16
for details.
Auto Vertical
Keystone
Automatically corrects the keystoning at the left/right side of the projected image.
12V Trigger
There is one 12V trigger that works independently according to your needs for
installation scenarios.
•
Off
: If this is selected, the projector will not send electronic signal out when it is
turned on.
•
On
: The projector will send a low to high electronic signal out when it is turned
on, a high to low signal out when it is turned off.
