![background image](http://html1.mh-extra.com/html/benq/lk936st/lk936st_user-manual_2734591027.webp)
27
Operation
The info page displays the information and status of this projector.
For more information, visit
http://www.crestron.com
&
www.crestron.com/getroomview
.
Shutting down the projector
1. Press
and a confirmation message will appear prompting
you. If you don't respond in a few seconds, the message will
disappear.
2. Press
a second time. The power indicator flashes
orange, the projection light source shuts down, and the fans
will continue to run for approximately 90 seconds to cool
down the projector.
3. Once the cooling process finishes, the power indicator
becomes a steady orange and fans stop. Disconnect the
power cord from the power outlet.
• To protect the light source, the projector will not respond to any commands during the cooling process.
• Avoid turning on the projector immediately after turning it off as excessive heat may shorten lamp life.
• Lamp life results will vary depending on environmental conditions and usage.
Press
Exit
to go back to the remote
network operation page.