![background image](http://html1.mh-extra.com/html/benq/joybook-r48-series/joybook-r48-series_user-manual_2733879059.webp)
Upgrading or replacing the memory
55
5. Remove the back cover.
6. Align the memory module with the slot, and then insert it.
When inserting, pay attention to the direction of the
memory module.
7. Push the memory module in place.
8. Replace the memory cover.
9. Use a screwdriver to secure the cover with the screw.
10. Place the battery on its original position (1), and then slide
“Battery retainer B” to the left (2). Connect the power
Ground yourself to your Joybook with professional grounding
equipment like an anti-static wristband, or touch the metal
surface on the inside of your Joybook to discharge any static
electricity.
• Handle the memory module by its edge and avoid touching
the contacts.
• Gently push the free edge downwards until the module locks
into place.
• If the memory module is not installed properly, your Joybook
may not boot properly.
• If you want to release the existing memory, push aside the
memory holders and remove the memory.
JB_R48_UM EN.book Page 55 Tuesday, April 13, 2010 5:47 PM