![background image](http://html1.mh-extra.com/html/benq/joybook-r48-series/joybook-r48-series_user-manual_2733879057.webp)
Upgrading or replacing the memory
53
Upgrading or replacing the memory
You can replace the existing memory module with a higher-
capacity one. Before you upgrade or replace memory, please
check on the BenQ web site to determine the module which can
be used, or contact BenQ distributor or customer service center.
It is recommended that you take your Joybook to the BenQ
distributor or customer service center for the upgrade or
memory replacement.
For details about the limit of maximum memory, refer to the
product information from
http://www.BenQ.com
.
1. Shut down your Joybook completely. Disconnect the power
adapter and turn over your Joybook.
2. Slide “Battery retainer B” to the left to its unlock position.
To find out the types of BenQ certified memory modules for
your Joybook, try the steps below:
1. Connect to BenQ Online Service and Support
(
http://www.benq.com/support/
).
2. Click
Knowledge Base
.
The website layout and content may vary by region/country.
• If you install an uncertified memory module, your system may
not work properly.
• Your Joybook may come with a built-in memory module pre-
installed on the motherboard. If you want to have it replaced,
please contact your dealer for assistance. Do not replace it
yourself to avoid voiding the warranty.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed software, parts, and/or non-original accessories.
Memory
cover
Battery
Battery retainer B
JB_R48_UM EN.book Page 53 Tuesday, April 13, 2010 5:47 PM