![background image](http://html1.mh-extra.com/html/benq/joybook-lite-u122-eco/joybook-lite-u122-eco_user-manual_2733872051.webp)
Using BIOS setup
47
in the entry field and press <Enter>. Confirm your password
by typing it again and pressing <Enter>.
Boot menu
The
Boot
menu contains the boot configuration settings of the
system and sets the sequence of boot devices. The system will try
to boot from the first device. If it is not available, the system will
try the next boot device.
a. Use < > or < > to select a device.
b. Press <F5> or <F6> to move the selected device up or
down in the booting sequence.
Exit menu
The
Exit
menu displays ways of exiting BIOS setup. After
finished with your settings, you must save and exit so that the
new settings can take effect.
•
Exit Saving Changes
: saves the changes you have made and
exits BIOS setup. After finishing with your settings, you must
save and exit so that the new settings can take effect.
•
Exit Discarding Changes
: exits BIOS setup without saving
the changes you have made.
•
Load Setup Defaults:
loads the default values for all the
items in the BIOS setup utility.
•
Discard Changes
: cancels all changes since last save, without
exiting the BIOS setup utility.
•
Save Changes
: saves the changes you have made.
If
Supervisor Password
and
User Password
are both set,
you can enter either one of them during the password prompt.
To have full privileges in BIOS setup, enter
Supervisor
Password
.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.
JBL_U122_Eco_UM_EN.book Page 47 Monday, October 12, 2009 2:39 PM