![background image](http://html1.mh-extra.com/html/benq/joybook-lite-u122-eco/joybook-lite-u122-eco_user-manual_2733872055.webp)
Replacing the memory
51
9. Gently push the free edge downwards until the module locks
into place.
10. Replace the memory cover.
11. Use a screwdriver to secure the cover with the screw.
12. Place the battery on its original position (1), and then slide
“Battery retainer A” to the right (2). Connect the power
adapter. When you start the Joybook Lite, it will
automatically test and configure the new memory.
If the memory module is not installed properly, your Joybook
Lite may not boot properly.
It is recommended that you go into BIOS to load setup
defaults after installing additional memory. For details, refer to
"Using BIOS setup" on page 44
.
Battery retainer A
JBL_U122_Eco_UM_EN.book Page 51 Monday, October 12, 2009 2:39 PM