32 Menu
operation
INFORMATION menu
LED Indicator
Selects to turn off the LED warning lights. This is to avoid any light disturbance
when viewing images in a dark room.
Network
Settings
•
Wired LAN
: See
BenQ Network Projector Operation Guide
.
•
AMX Device Discovery
: When this function is
On
, the projector can be
detected by AMX controller.
•
Network Standby
: When this function is
On
, the projector is able to provide
the network function when it is in standby mode.
•
MAC Address
: Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain:
Picture Mode
,
User Mode Management
,
Brightness
,
Contrast
,
Color
,
Tint
,
Sharpness
,
Advanced
,
Projector Position
,
Source Rename
,
Password
, and
Wired LAN
.
ISF
The ISF calibration menu is password protected and only accessible by authorized
ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these
standards to obtain optimal picture quality from BenQ video display devices.
Accordingly, we recommend that setup and calibration be performed by an ISF
certified installation technician.
For more information, go to www.imagingscience.com or contact the dealer or retailer from whom
you purchased the projector.
Current
System Status
•
Source
: Shows the current signal source.
•
Picture Mode
: Shows the selected mode in the
PICTURE
menu.
•
HDR
: Shows the HDR status.
•
Resolution
: Shows the native resolution of the input signal.
•
Color System
: Shows input system format.
•
Color Gamut
: Shows the
Color Gamut
status.
•
Light Source Usage Time
: Shows the number of hours the lamp has been
used.
•
3D Format
: Displays the current 3D mode.
3D Format
is only available when 3D is enabled.
•
Firmware Version
: Shows the firmware version of your projector.
