10 Introduction
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR
remote control sensor(s) to function correctly. The distance between the remote control and the
sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the
projector that might obstruct the infra-red beam.
13.
TEST PATTERN
Displays the test pattern.
14.
DEFAULT
Resets the current function to default factory
setting.
15.
CINEMAMASTER
Displays the
CinemaMaster
menu.
See
.
16.
INVERT
When your 3D image is distorted, enable this
function to switch between the image for the
left eye and the right eye for more
comfortable 3D viewing experience.
17.
DYNAMIC IRIS
The key function is not available with this
model.
18.
LIGHT MODE
Selects a suitable lamp power from among the
provided modes.
19.
ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or even
cause a fire.
20.
KEY LIGHT
Turns on the remote control backlight for a
few seconds. To keep the backlight on, press
any other key while the backlight is on. Press
the key again to turn the backlight off.
• Operating the projector from the front
• Operating the projector from the rear
App
rox.
+30
º
App
rox.
+30
º
