![background image](http://html.mh-extra.com/html/benq/ht2050/ht2050_user-manual_2733763023.webp)
23
Operation
2. Write down the number and turn off the projector.
3. Seek help from the local BenQ service center to decode the number. You may be required to provide
proof of purchase documentation to verify that you are an authorized user of the projector.
The "XXX" shown in the above messages are numbers that vary depending on different models.
Changing the password
To do this, first and foremost, you have to access the
Advanced
OSD menu (see page
for details).
1. Go to
System Setup : Advanced
>
Password
to display the
Password
window.
2. Select
Change Password
and press
OK
to display the
Input Current Password
window.
3. Use the arrow keys on the projector or remote control to enter the old password.
• If the password is correct, the
Input New Password
window displays.
• If the password is incorrect, the password error message displays, and the
Input Current
Password
window displays for your retry. You can either try another password or press
BACK
to cancel the change.
4. Enter a new password.
5. Re-enter the same password to verify.
Do make a note of your password, and then keep the note in a safe place for later recall.
6. You have successfully set a new password. Remember to enter the new password next time you turn
on the projector.
7. Press
BACK
to save your changes and exit.
Disabling the password function
To do this, first and foremost, you have to access the
Advanced
OSD menu (see page
for details).
1. Go to
System Setup : Advanced
>
Password
to display the
Password
window.
2. Select
Power On Lock
and use / to set
Off
.
3. Enter the current password.
• If the password is correct, the
Password
window displays that
Power On Lock
is
Off
. You will
not be asked to enter the password next time when turning on the projector.
• If the password is incorrect, the password error message displays, and then the
Input
Password
window displays for your retry. You can either try another password or press
BACK
to cancel the change.
4. Press
BACK
to save your changes and exit.
Though the password function is disabled, you need to keep a note of the old password in case you ever need
to re-activate the password function by entering the old password.
Input Current Password
Back