![background image](http://html.mh-extra.com/html/benq/ht2050/ht2050_user-manual_2733763022.webp)
22
Operation
3. As the window indicates, the four arrow keys ( / / / ) respectively represent 4 digits (1, 2, 3, 4).
Use the arrow keys on the projector or remote control to set a six-digit password. The digits display
as ****** when you enter them.
4. Re-enter the same password to verify and return to the
Password
window.
5. Select
Power On Lock
and use / to set
On
.
6. Enter the current password to enable the function.
7. Press
BACK
to save your changes and exit.
If you forget the password
If you enable the password function, you’ll have to enter your password each time you turn on the
projector. Once you enter an incorrect password, the error message displays, and the
Input Password
window follows.
You can retry by entering another six-digit password, or if you absolutely do not remember it, use the
password recall procedure. See
Entering the password recall procedure
for details.
If you have entered an incorrect password 5 times in succession, the projector will automatically shut
down in a short time.
Entering the password recall procedure
1. Make sure the Password window displays on screen, then press and hold
AUTO
on the projector or
remote control for 3 seconds. The projector will display a coded number on the screen.
• Under the Advanced OSD menu
• Under the Basic OSD menu
• Under the Advanced OSD menu
• Under the Basic OSD menu
Input New Password
Back
Password Error
Please try again.
Password Error
Please try again.
Please write down the recall code,
and contact BenQ
Customer Center.
Recall code:
XXX XXX XXX XXX
Recall Password
Exit
Recall Password
XXX XXX XXX XXX
Please write down the recall code, and contact
BenQ Customer Center.
Recall code: