15
Preparing the camera before using
To remove an SD card:
1. Unlock and open the battery / card cover.
2. Lightly press the edge of the memory card to eject.
3. Close and lock the battery / card cover.
Turning on and off
• Switch the power lever by the mode dial to
ON
, and the camera is turned on in capture mode.
• Switch the power lever by the mode dial to
OFF
, and the camera is turned off.
You will be prompted to setup the OSD language and the date and time when the camera is turned
on for the first time.
Setting the OSD language
Selects the language to be shown on the screen.
To select a language:
1. Press
>
>
Language
.
2. Use 4-way control and press
to locate and set the desired language.
Setting date and time
When using the camera for the first time or when the battery has been removed from the camera
for a long time, you need to set the date and time. The date and time is recorded when a video or
image is captured.
To set date and time:
1. Press
>
>
Date & Time
.
2. Use 4-way control to move and select date, time, and date format. Press
to set the date and
time.
Before turning on the camera, be sure to remove the lens cover. Otherwise, the lens will not be extended and the
camera will beep for a few times.
Ignorance of the setting of language will lead OSD language to English as the default.
Lack of the setting of date and time will stop the time and remain the date by default.
