background image

74

Procedure

[SET] 

 MENU 

 Set Up Tab 

 REC/PLAY

With “Power On/Off”, the camera turns off when you press [

] (REC) in the REC mode 

or [

] (PLAY) in the PLAY mode.

Change this setting to anything besides “Disable” before connecting to a TV for image 

viewing.

Procedure

[SET] 

 MENU 

 Set Up Tab 

 

 Disable

The camera will not start the image delete operation when you press [ ] (Delete) while 

 Disable” is turned on.

You can protect against accidental deletion of images by selecting “On” for 

 

Disable”.

Performing a format operation will cause all images to be deleted, even if file deletion is 

disabled (“On” selected for “

 Disable”) for some images.

Configuring [ ] and [ ] Settings (REC/PLAY)

Power On

Camera turns on whenever [

] (REC) or [

] (PLAY) is pressed.

Power On/Off

Camera turns on or off whenever [

] (REC) or [

] (PLAY) is 

pressed.

Disable

Camera does not turn on or off whenever [

] (REC) or [

(PLAY) is pressed.

Disabling File Deletion (  Disable)

Downloaded From camera-usermanual.com BenQ Manuals

Summary of Contents for GH210 Series


















































































Reviews: