BenQ GH210 Series User Manual Download Page 24

Page: 24 / 81

Use the following procedure to view snapshots on the camera’s monitor screen.

Press [ ] (PLAY) to enter the PLAY

mode.

•

This will display one of the snapshots
currently stored in memory.

•

Information about the displayed snapshot
also is included.

•

You also can clear the information to view
only the snapshot.

•

You can zoom in on the image by sliding
the zoom controller towards

. If you are recording a snapshot that is very

important to you, it is recommended that you zoom the image and check its details
after recording it.

Use [ ] and [ ] to scroll between images.

•

Holding down either button scrolls at high speed.

NOTE

•

Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.

Viewing Snapshots

[

] (PLAY)

[

]

[

]

[

]

[

]

Downloaded From camera-usermanual.com BenQ Manuals

Summary of Contents for GH210 Series


















































































Search results

Summary of Contents for GH210 Series

Reviews:

Related manuals for GH210 Series

Brands by name

Popular brands

BenQ GH210 Series, User Manual

Search results

Summary of Contents for GH210 Series

Reviews:

Related manuals for GH210 Series

Brands by name

Popular brands