The On-Screen Display (OSD) Menu
36
Performing Manual Installation
The Manual Installation option allows you to manually adjust channel settings.
1. In the TV Menu, press the
or
buttons to select Manual Installation. and then press the
OK button. The following menu will appear.
2. Press the
or
buttons to select a TV standard according to your local TV system. (EURO is
used for Australia and New Zealand)
3. Press the
button to highlight PR Select and then press the
or
buttons to select a TV
channel position you want to set up.
4. Press the
button to highlight Frequency and then press the
or
buttons to start the tun-
ing system. If the tuned channel is incorrect, press the
or
button again until your desired
channel is located.
5. Press the
button to highlight Fine Tune and then press the
or
buttons to adjust the
reception of TV signal.
6. (Optional) If the SCART signal input is connected, press the
button to highlight Decode
and then press the
or
buttons to select from the following options:
• On: Select this option if you are using a decoder supplied from your TV system.
• Off: Select this option if no external decoder is used.
7. Press the MENU button again to close the menu.
