Eng
lish
PC Dependent Features
19
4.2.1 Step 1: Connect the digital camera to your computer
1. Rotate the mode dial to [
], and then press the [
]
button to turn on your camera.
2. In the [
] menu, select [USB] with the
/
and
then press the
OK
button.
3. Select [PC] with the
/
and then press the
OK
button.
4. Connect one end of the USB cable to an available USB port on your computer.
5. There will be a new “Removable Disk” icon detected in “My Computer”, which contains
your captured images or recorded video clips.
4.2.2 Step 2: Download images or video clips
When the digital camera is turned on and connected to your computer, it is considered to be
a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying
them from the “Removable Disk” to your computer hard drive.
Windows
Open the “Removable Disk” and double-click on the DCIM folder to open it to find more
folders. Your images are inside these folder(s). Select the desired still images or video clips,
and then choose “Copy” from the “Edit” menu. Open the destination location (folder) and
choose “Paste” from the “Edit” menu. You may also drag and drop image files from the
digital camera to a desired location.
•
Memory card users may prefer to use a memory card reader (highly recommended).
•
Video playback application is not included with the package. Make sure that video play-
back application has been installed in your computer.
4.3
PictBridge Mode
Even if you do not have a computer, you can connect the camera directly to a printer that
supports PictBridge to perform image selection and printing using the camera monitor
screen and controls. PictBridge support also enables you to specify which images you want to
print and how many copies of each should be printed.
To connect the camera to the printer:
1. Rotate the mode dial to [
], and then press the [
] button to turn on your camera.
2. In the [
] menu, select [USB] with
/
and then press the
OK
button.
3. Select [PictBridge] with
/
and then press the
OK
button.
4. Connect your camera and the printer via a supplied USB cable.
The screen turns off automatically and the setting screen will appear on the monitor after
seconds of time.
