background image

BenQ DC 5530  User’s Manual

Eng

lish

Using the DC E43

20

3.6.4.2

Format

This function erases all images and reformats the SD card loaded in your camera. Protected 
images are also erased. The SD card cannot be formatted if it is write protected. Select this 
option and select Execute with the 

 / 

 buttons to format the SD card and press SET; 

otherwise, select Cancel.

3.6.4.3

Fr. No Reset

This menu creates a new folder, and the images and movie clips are recorded to the newly 
created folder from number 0001.

• Cancel: Cancels the operation.
• Execute: Resets the file number and creates a new folder.

3.6.4.4

Date/Time

This sets the date and the time.

1. Select Date/Time with the 

 / 

 buttons and press the SET button. The Date/Time 

setting screen will be displayed.

2. Select the date or time field with the   /   buttons and adjust the value for the date and 

time with the 

 / 

 buttons. The date and time is set in the order: year-month-day-

hour-minute. The time is displayed in 24-hour format.

3. Press the SET button.

The setting will be stored and the screen will return to the set-up menu. 

3.6.4.5

Auto off

If no operation is performed for a specific period of time, the camera is automatically turned 
off. This feature is useful to reduce battery wear. 

• 1 Min.: Turns the power off after 1 minute of inactivity.
• 2 Min.: Turns the power off after 2 minutes of inactivity.
• 3 Min.: Turns the power off after 3 minutes of inactivity.

3.6.4.6

Sys. Reset

This returns all basic settings to the camera’s default settings. The time setting is not reset.

• Cancel: Does not return to the default settings.
• Execute: Returns to the default settings.

3.6.4.7

Language 

This option lets you specify the language for the menus and messages displayed on the screen. 
Select the desired language from the following options with the 

 / 

 buttons: English, 

French, German, Spanish, Italian, Chinese (Traditional), Chinese (Simplified). Press the SET 
button to confirm.

Notes

• 

Format an SD card by this camera before using it.

• 

An SD card having any problem cannot be properly formatted.

Summary of Contents for DC E43





























Reviews: