![background image](http://html.mh-extra.com/html/benq/dc-c800/dc-c800_user-manual_2733662009.webp)
BenQ DC 5530 User’s Manual
En
gl
is
h
Using the DC C800
5
U
SING
THE
DC C800
3.1
Turning the Power On and Off
1. Press the POWER button to turn on the camera in
the Record mode. Or you can press the
button to
turn on the camera in the Playback mode.
2. Press the POWER button again to turn the power off.
•
You can turn on the camera without the start-up and
operating sound by pressing and holding the POWER
or the
button for over 1.5 seconds.
3.2
Power Saving Function
If the camera is turned off by Power Save feature, press the POWER or the
button to turn
it on again.
The Power Save feature does not work in the following situations:
•
Connecting the camera to a computer or printer with the USB cable.
•
Connecting the camera with the AC adapter (sold separate).
•
About the Power Save operation, refer to 3.16.3 “Setting the Power Save” on page 22.
3.3
Switching between Record and Playback
You can switch between Record mode and Playback mode in following ways:
3.3.1 In Record mode
•
Press the MODE button to cycle through the still image shooting, voice recording,
and movie recording.
•
Press the
button to switch to the Playback mode.
•
If you switch to Playback mode, the lens will retract after approximately 10 seconds.
3.3.2 In Playback mode
Press the MODE or the
button switch to the previous used Record mode.
1
Press down halfway
2
Press down fully
DC_C800_UM.book Page 5 Friday, October 21, 2005 2:58 PM