En
gli
sh
Troubleshooting
21
The camera does not
shoot even when
pressing the shutter
button.
The battery is running low.
Recharge your batteries or replace
with new batteries.
The camera is not in Shooting
Mode.
Switch to Shooting Mode.
The shutter button was not pressed
all the way down.
Press the shutter button all the way
down.
The internal memory or memory
card does not have any free space.
Load a new card or delete unwanted
files.
The flash is recharging.
Wait until the flash mode icon, indi-
cated on the screen, stops flashing.
The camera does not recognize the
memory card.
Format the memory card before the
initial use or before using with
another camera.
Colors of the images
taken are not shown
properly.
White Balance was not set properly
when these images were taken.
Select a suitable White Balance set-
ting before taking each picture.
After connecting the
camera to a com-
puter, an error mes-
sage “Device not
ready” or “Camera
not ready” appears.
The computer runs on Windows 98
or earlier.
—
When connecting the
camera to a com-
puter, the computer
freezes.
The memory card inside the camera
may not be formatted.
Format the memory card to the
FAT16 format using a card reader in
Windows.
A memory error
occurs.
The memory card may not be for-
matted correctly.
Re-format the memory card to the
FAT16 format using a card reader in
Windows.
Symptom
Cause
Solution
DC_C630_UM.book Page 21 Tuesday, February 14, 2006 10:01 AM
