background image

BenQ DC 3400 User’s Manual

4

G

ETTING

 S

TARTED

Attaching the Hand Strap

1. Run the small looped end of the hand strap through 

the hand strap eyelet.

2. Bring the other end of the strap through the loop and 

pull.

Turning the Camera Off and On

You can turn the camera off and on in two ways:

• Open and close the lens cover to turn the power on 

and off (snapshot and movie mode only)

• Press and hold the power switch to turn the power on and off

Recharging the Battery

The DC 3400 is equipped with a built-in rechargeable 

battery that can be recharged by connecting the included 

AC power adapter or by connecting the camera to a 

computer with the included USB cable. Recharging 

takes about two hours.
The indicator LED glows orange when the battery is 

charging. When the battery is charged, the indicator LED 

turns off.

Warning

: Use the adapter that came with your DC 3400. 

Do not use other adapters.

Note

: A minimum of 5 minutes charging time is required to regain minimal power of 

the digital camera.

Using an SD Flash Memory Card

Inserting an SD Card

1. Turn the camera off.

2. Open the memory card compartment cover.

3. Insert the SD card into the slot until you 

hear a click.

4. Close the compartment cover.

Removing an SD Card

1. Turn the camera off.

2. Open the memory card compartment cover.

3. Press down on the edge of the SD card. The card will spring up.

4. Gently grasp the card and pull it out. Close the compartment cover.

Note

: If you are using an SD card in the DC 3400

 

for the first time, you must format 

it. See page 17 to learn how to format the card.

USB

8

MB

LOCK

Summary of Contents for DC 3400



























Reviews: