![background image](http://html.mh-extra.com/html/benq/dc-2300/dc-2300_user-manual_2733635015.webp)
BenQ DC 2300 User’s Manual
12
5. Press Right Direction Button (
) to confirm the setting or select Menu
Button to cancel the setting.
3.1.3. Video Mode
Please set the Mode Dial at Video Mode (
) .
Select The Time Of Movie Clip
1. Select the time for the movie clip,"10 seconds, 20 seconds, 30 seconds" or
"Manual".
2. Press Right Direction Button (
) to confirm the setting.
3. Press Shutter Button to start recording.
Note
After above steps are done, please check if the (
) is shown on the left down corner. If
it is not shown please repeat the steps again.
Note
This function can only work with a memory card. It cannot work with the built-in flash
memory.
Note
1. When 10, 20 or 30 seconds is selected, press the Shutter Button and the camera will
start the recording and stop automatically according to the set time.
2. When "Manual" is selected, press the Shutter Button to start the recording and press the
Shutter Button to stop the recording, the file length can be unlimited because it depends
on the media capacity.
Note
The TFT LCD Monitor will show "Low Light!" as a warning to remind you that the video
which you are going to record is in a low light environment. It is suggested not to record the
video or to record it in a stronger light environment.
Summary of Contents for DC 2300
Page 1: ...DC 2300 User s Manual ...