![background image](http://html.mh-extra.com/html/benq/dc-2300/dc-2300_user-manual_2733635014.webp)
BenQ DC 2300 User’s Manual
11
3. Press Right Direction Button (
) to start the slide show.
You can press Menu Button to cancel the slide show.
VIII. Set An Image At Protect Status Or Cancel The Protection Of
An Protected Image
Please set the Mode Dial at Playback Mode (
) and press Menu
Button to enter "Play" menu table.
IX. To Set An Image At Protect Status (Preset at Unlock)
To set an image at protect status can prevent the selected image from erasing.
1. Select "Protect".
2. Select "Lock" to protect the selected image.
3. Press Right Direction Button (
) to confirm the setting.
X. To Cancel The Protection Of An Protect Image
1. Select "Protect".
2. Select "Unlock" to cancel the protection.
3. Press Right Direction Button (
) to confirm the setting.
XI. Print Out An Image With A Printer Without Going Through PC (Preset
at X0)
Please set the Mode Dial at Playback Mode (
) and press Menu Button to enter
"Play" menu table. Use Up Direction Button (
) and Down Direction Button
(
) to move the color bar to the feature you would like to set up.
1. Select "Prints ".
2. Select the number of copies you would like to print out from X0 to X9. The
number means the number of the copies you would like to print out.
3. Take out the memory card from the camera and put it into the card reader
slot of the printer.
4. Set the printer at DPOF Print and then the printer will print out the selected
image(s) according to the set number(s).
Note
After above steps are done, please check if the (
) is shown on the right side. If it is not
shown please repeat the steps again.
Summary of Contents for DC 2300
Page 1: ...DC 2300 User s Manual ...