Release
1.0
Technical Documentation
11/2005
TD_Repair_L1-L3_C72_R1.0.pdf
Page 13 of 45
8
GRT Software: Functionality Configuration
Step 1:
Select „Settings >> SWUP / JPICS”
Step 2:
Proceed as follows
:
¾
Select all required Variants you need to repair (click onto the “+” in
front of the product name.
¾
Check Com-Port setting. If necessary change it
¾
Check speed setting. Select always the lowest speed if your PC
does not have a fast serial card
¾
Enter the value for “JPICS Server Timeout”. Be careful, this value
defines how long GRT tries to reach the server until you get an
error message. Do not select a very long time
2
4
1
3
Company Confidential
2005©BenQ
