Switch mode, single-phase, sine-wave Inverter
Product line TEBEVERT
August 8, 2005 - DTL
16/21
No. 4219en R2
4
Assembly and commissioning
Attention!
The safety instructions must be observed at all times during
assembly, installation and commissioning!
After installation, connecting and commissioning the inverter is ready for
operation without restriction. No additional settings and readjustments are
necessary during operation under all operating conditions.
The inverter is designed for operation in closed and dry environment. The
maximum permissible ambient temperature is +40°C. without de-rating. The
inverter is designed to operate in a controlled environment. Attention must be paid
that the inverter is not exposed to aggressive airborne substances and that the
passage of cooling air is not hampered.
4.1
Device settings
Attention!
No adjustments are necessary for normal operation of these units.
4.2
Connecting the inverter
Attention!
The power-supply circuits (Commercial AC bypass input cable
and DC supply cables) must be provided with a disconnecting
device. The disconnecting devices should be readily accessible in
the vicinity of the inverter.
If a battery is connected, then the instructions concerning the
installation and maintenance given by the manufacturer of the
battery must be observed.
Before connecting the inverter, make sure that none of the
connections are live!
