Benning DSP 2500, Operation And Maintenance Manual

Page: 7 / 36

DSP 2500 Inverter System
10.15.07
2 028-0009-200
1. Safety Notes
The inverter is an electronic device which operates at
dangerous voltage and current levels.
For this reason, the following instructions must be followed at all times!
1. The inverter should be installed, operated, repaired and
maintained in accordance with the instructions in this document.
2. Only fully trained and qualified personnel should have access to
the system. Only qualified and authorized personnel should be
able to install the units.
3. Capacitors may be charged even when the unit is disconnected.
These must be correctly discharged by a qualified electrician
before the connections or terminals are touched.
4. When working with the unit, use properly insulated tools at all
times which are suitable for the levels of voltage concerned.
5. All persons working with the unit must be familiar with the first-
aid measures to be adopted in cases of accidents involving
electricity.
6. Always observe the regulations of the local operating company
as well as other safety regulations.
Attention!
The inverter may be operated at 120 (L1, N, G), 240 (L1-
N/L2-G) or 120/240 (L1-N-L2) systems.
The neutral conductor of the inverter is connected internally
to the protective wire. ( )