Benning DSP 2500, Operation And Maintenance Manual

Page: 28 / 36

DSP 2500 Inverter System
10.15.07
23 028-0009-200
Attention!
Maintenance and repair of the inverter should only be
carried out by qualified personnel.
The chassis grounding point or the AC neutral conductor
should never be disconnected. It is essential to observe the
safety notes!
13. Description of Function
The DSP DC to AC Inverter is designed to provide clean AC power, up to
2.5kVA or 2000W to a mixture of servers, PC’s and/or switches in a Data
Cabinet. The unit shall operate from 48VDC and provide clean AC power to
the customer’s equipment.
The physi
cal size shall be no more than 3.5” H x 17.25”W x 20.5” D (including
connectors) and shall be designed to mount in a 19” data cabinet.
The unit will be equipped with three modular panels in the rear for different
output connection options and three different output voltage options. The
options shall include:
1. 120VAC Output
Three NEMA 5-15R output receptacles protected by a 15A push to reset circuit breaker
Three NEMA 5-15/20R output receptacles protected by a 20A push to reset circuit
breaker
One 120VAC Bulk Terminal Block Output (L, N, G) protected by a single-pole 30A
rocker style breaker
Twist Lock L5-30R protected by a single-pole 30A rocker style breaker
Dual RJ-45 receptacles for parallel unit operation
2. 240VAC Output
Two IEC-320-C13 output receptacles protected by a 15A push to reset circuit breaker
Two IEC-320-C19 output receptacles protected by a 15A push to reset circuit breaker