Bennett PULSER, Manual

Page: 5 / 19

Bennett Pulser Assembly Instruction Manual Safety Information
3
SECTION 1: SAFETY INFORMATION
For safe installation of this equipment, read and understand all dangers, warnings, and cautionary information. Save this safety information
in a readily accessible location. Look for the following warnings throughout the manual:
Red and White “DANGER” means: If you do not follow the instructions, severe injury or death will occur.
Orange and Black “WARNING” means: If you do not follow the instructions, severe injury or death can occur.
Yellow and Black “CAUTION” means: If you do not follow the instructions, damage can occur to the dispenser.
Blue and White “IMPORTANT” means: Helpful tips and other recommendations on equipment installation, usage, and maintenance
should be observed.
DANGER PELIGRO DANGER

FIRE, EXPLOSION, INJURY, OR DEATH WILL OCCUR IF FUEL FILTERS ARE CHANGED BY UNTRAINED PERSONNEL.
MAKE SURE, ONLY TRAINED PERSONNEL CHANGE FILTERS.

TO PREVENT INJURY TO YOU FROM VEHICLES AND ONLOOKERS, ALWAYS PLACE A BARRIER AROUND THIS
EQUIPMENT BEFORE PERFORMING SERVICE OR MAINTENANCE.

GASOLINE AND FUEL ETHANOL IS FLAMMABLE. NO SMOKING OR OPEN FLAME.

FUEL ETHANOL IS POISONOUS AND SHOULD NOT BE INGESTED.

DISCONNECT ALL POWER, RELIEVE PRESSURE TO THIS EQUIPMENT, AND ASSOCIATED COMPRESSOR DURING
INSTALLATION, SERVICE, OR ANY MAINTENANCE I.E., CHANGING FILTERS.
WARNING ADVERTENCIA MISE EN GARDE

You must have training in the installation, service, or maintenance of this equipment (dispenser, pump, console,
control box, or submerged pump) before working on it. Maintenance repairs must be done by authorized personnel
only. Warranty work may only be performed by Bennett certified technicians.

To prevent electric shock, keep the electrical parts of the dispenser dry.

Electronic components are static sensitive. Use only proper static precautions (e.g. static straps) before working on
the equipment.

The emergency shut-off valve (also called the fire valve, shear valve, or impact valve) must be closed when service
or maintenance is performed on this equipment.

You must have training in the operation and programming of this dispenser before using it. READ THE OPERATORS
MANUAL.

Make sure this equipment is correctly grounded. Failure to do will cause injury or damage equipment or improper
operation. Improper grounding voids the warranty.

Make sure that all labels, decals, warning, cautions, and instructions are fastened to the equipment. Order
replacement labels from Bennett.
CAUTION PRECAUCIÓN MISE EN GARDE

Do not drill holes in fuel dispensers. Holes can cause failure of the electronic equipment. THE WARRANTY WILL
BECOME VOID. Use only adhesive backed sign mounting brackets.
IMPORTANT IMPORTANTE IMPORTANT

All trained technicians must work in accordance to all requirements, standards, and guidelines specified by the
suppliers Environmental Standards® Health, Safety, Security & Environment (HSSE) policies. Note: Bennett Pump
highly recommends all technicians observe HSSE policies defined by the supplier. Bennett Pump does not impose
any restrictions or additional requirements contained in Environmental Standards® Health, Safety, Security &
Environment (HSSE) policies.
!! READ AND UNDERSTAND ALL WARNING LABELS ATTACHED TO THE DISPENSER!!