DRY VACUUMING:
Your HYDRO 15 vacuum is perfect for vacuuming carpets, tiles, mattresses, upholstery,
curtains and car upholstery. The powerful suction and exceptional combination of filters
ensures that all the dirt in your home is sucked up, filtered, and only clean, healthy air is
returned back into your home.
7.
SETTING UP YOUR HYDRO 15 FOR DRY VACUUMING:
5. Add 3 capfuls of BENNETT READ HYDRO de-foamer (27) to the water. The de-foamer is
important as it stops the formation of foam in the water filter. This protects the machine
from blockages and damage
6. Replace the complete filter housing assembly into the water filter tank. Make sure that the
microparticle filter is properly attached
7. Replace the motor unit and fasten the locking clips in place
2.
1.
1. Lift the locking clips (13) upwards, then
remove the motor unit (3) from the water
filter tank (11)
2. Remove the filter housing assembly
(5+6+7+8) by lifting it upwards
3.
4.
4. Add clean water into the water filter tank.
Do not exceed the water max. level mark
on the diffuser pipe (9-B)
3. Attach the diffuser pipe (9-A) to the inlet
inside the water filter tank
Summary of Contents for HYDRO 15
Page 16: ......
