10.
WET VACUUMING:
Your HYDRO 15 can also suck up large volumes of liquids in and around your home. Wet
spills can be responsible for harsh odours in your home and can also promote the growth of
mildew, bacteria and fungi. Please note that your HYDRO 15 is NOT a carpet deep cleaner.
Carpet deep cleaning should be done with specialised deep cleaners.
We recommend the BENNETT READ ONE for deep cleaning.
SETTING UP YOUR HYDRO 15 FOR WET VACUUMING:
If you intend using your HYDRO 15 to vacuum up liquids, DO NOT fill it with water at set up.
To beging setting up your HYDRO 15 for wet vacuuming follow steps 1 - 9 from “CLEANING
YOUR HYDRO 15” on page 9, then follow the steps below:
3. Ensure that the diffuser filter pipe (9-A) has been removed from the water/dirt tank
4. Replace the mechanical water-level detector (5) into the water/dirt tank
5. DO NOT install the microparticle filter guard (6) into the water/dirt tank
6. Replace the motor unit and fasten the locking clips
7. Attach the wet spill suction head (26) to free end of the extension wand (18)
8. Unwind the power cable and plug it into the wall socket
9. Switch on unit using the power switch (1)
10. Vacuum wet spill from surface
• Do not put water into the tank before vacuuming wet spills
• When you are done, follow the cleaning instructions as outlined on page 9
NOTE:
Your HYDRO 15 is equipped with an automatic suction cut-off valve. When using as a wet
vacuum, the valve will prevent further suction once the water tank full level of approximately 13
litres is reached.
2.
1.
1. Install the black sponge filter (21) over
the float cage located under the
mechanical water-level detector (5)
2. Then attach the filter lock (22) by lining
up the notches and turning it clockwise
until secured
Summary of Contents for HYDRO 15
Page 16: ......
