20
21
SpECifiCAtiOnS
Power supply
12V Transformer for faucet and soap dispenser
220/110V Ac for dryer
Recommended water pressure
0.5-8.0 bar (
7-116
PSI)
With water pressure of more than
8
bars, use a pressure reducing valve
Sensor range faucet
Self adjusting sensor. Adjustable with remote control
Min:
80
mm; Max:
300
mm
Sensor range soap dispenser
Factory Set:
150
mm (adjustable by remote control
30-100
mm)
Soap capacity
6
Liter / 1.6 Gallon
Soap viscosity
100 - 3800
cPS
Standard soap discharge
0.8cc, Adjustable
Security time (faucet)
90
seconds. Adjustable.
Hot water temperature
m
ax. 70ºc
code Number
1990101
tEchnical Data
installation
stEP 1 – Wall Mounting
1
Firmly attach the wall support to the
wall.
Note: Ensure the wall support is
installed leveled.
Screws not included.
2
Place the Sensor Waschstation unit
on the support. Make sure to pass the
electrical wire(s) and valves through
the holes in the Sensor Waschstation.
3
Secure the Sensor Waschstation
cabinet to the wall by installing the
masonry anchors and screws provided.
stEP 2 –connEct thE WatEr systEM
for Sensor Waschstation with cold water
option:
connect the water system to inlet B1
B1
B2
for Sensor Waschstation with premixed water
option:
connect hot water system to B1 and cold water
system to B2
Note: Before installing the Sensor Waschstation, flush water lines and shut off all valves.
