Benewake(Beijing)Co., Ltd
CE30-D Product Manual - V04
Page
4
1. CE30-D introduction
CE30-D is a solid-state array LiDAR developed based on the TOF theory. Compared with single-
channel scanning LiDARs, there is no any mechanical rotating component, so it can run steadily
and reliably for a long time, able to get a wider range of vertical detection.
At the top, bottom, left, right and back, CE30-D has mounting location holes provided, through which it can
be fixed with peripheral devices reliably. See
Figure 1
for the positions and spacing of the mounting holes
subject to the size of M3.
1. Enclosure
2. Emitting panel (working area , cannot be covered)
3.
Reception panel (working area , cannot be covered)
4. Power
5. Ethernet interface (M8 aerial plug)
6. Equipment installation hole (M3)
Figure 1 DELIADAR CE30-D outer dimensions
2. Operation of Display Program
CE30-D has provided a complete SDK based on Linux and Windows systems for customers’ fast
development and use. Please log on to our wibeside to get the SDK source code and the corresponding
documentation.
http://en.benewake.com/download.html
This display program is used to process and display the output data of CE30-D LiDAR under the Windows
operating system. Before using this display program, please confirm that the local folder of the display
program contains complete documents necessary for operation:
