BENECOM BNC-15T-IP, User Manual

Page: 8 / 68

BNC-15T-IP User Guide
www.benecomc.co.kr
6
♦
The power cord set must have a minimum current capacity of 10A
and a normal voltage rating of 125 or 250 volts AC, as required by
each country’s power system.
♦
The appliance coupler must meet the mechanical configuration of
an EN 60320. / IEC 320 Standard Sheet C13 connector, for mating
the appliance inlet on the computer.
Power Cord Set Requirements
♦
The power cord set (appliance coupler, flexible cord, and wall plug)
you received with the computer meets the requirements for use in
the country where you purchased the equipment.
♦
Power cord sets for use in other counties must meet the
requirements of the country where you use the computer. For more
information on power cord set requirement, contact your local
authorized dealer, reseller, or service provider.
♦
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from apparatus.
♦
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Battery (Lithium)
1. English
CAUTION: DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER. DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S