BENECOM BNC-15T-IP, User Manual

Page: 5 / 68

BNC-15T-IP User Guide
www.benecom.co.kr
3
must not be blocked or covered. The product should never
be placed near or over a radiator or heat register, or in a
built-in installation unless proper ventilation is provided.
8. This product should be operated from the type of power
indicated on the marking label. If you are not sure of the type
of power available, consult your dealer or local power
company.
9. Do not allow anything to rest on the power cord. Do not
locate this product where persons will tread on the cord.
10. If an extension cord is used with this product, make sure that
the total ampere rating of the equipment plugged into the
extension cord does not exceed the extension cord ampere
rating. Also, make sure that the total rating of all products
plugged into the wall outlet does not exceed the fuse rating.
11. Never push objects of any kind into this product through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electronic shock.
Never spill liquid of any kind on the product.
12. To reduce the risk of fire, use at least No. 26 AWG wire for
the telecommunication line cord.
13. Always disconnect all telephone lines & all power cords from
the wall outlet before servicing or disassembling this
product.
14. Refer your system for servicing to qualified service personal
under the following conditions:
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the product.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions,
since improper adjustment of other controls may result