Please follow the instruction carefully to ensure an accurate test result.
Chapter 3
How to Perform a Test
3.1 Before Testing
Materials you need to perform a test:
• BeneCheck Meter
• BeneCheck Test Strip
• Lancing Device/ Lancets
• Tissue or cotton ball with 75% ethanol or disinfection wipes for cleaning the sampling area
before test.
Adjustable AST Tip
(for alternate site
sampling)
3.2 Perform the Test
• Twist and remove the
adjustable tip.
• Insert a lancet into
the holder firmly.
1
2
• Twist and remove the
protective disk.
• Save the disk for discard use.
• Do not twist the lancet.
• Twist back the tip.
• Adjust skin
penetration depth by
turning the front end.
3
4
• Take out a test strip and close
the vial immediately, or other
strips will get damp.
• Insert the strip
contact bar into meter
test port.
• The meter will turn on
automatically.
5
6
• Make sure the code numbers
are the same on screen and
strip vial label in CHOL or UA
test.
• You can start testing after
“
” appear.
• Pull back the sliding
barrel till it clicks, and
the lancing device is
ready to use.
7
8
• Hold the lancing device firmly
against sampling site.
• Press the release button.
9
10
Lancet Holder
Ejection System
Sliding Barrel
Release Button
Depth Indicator/
Adjustable Tip
(for fingertip sampling)
23
Note:
Wash your hands with water and soap
thoroughly before and after testing, and
make sure the sampling area is dry before
testing.
Penetration Depth
1
2
3
4
5
Shallow
Deep
Beijing Riucheng Medical Supplies Co.,Ltd
Fengxiang Avenue, Fengxiang
Development Zone, Yangsong Town,
Huairou District, Beijing 101400 China
TEL:+86-10-61678701
Operation
Test Strip
Control Range
7142
7142
Note:
If “ ” does not appear, remove the
unused strip and repeat step 5.
