10
CLEANING INSTRUCTIONS. CERTIFICATES
Gentle and proper cleaning of furniture surfaces and partition
walls is especially important in retaining their optimum
condition for as long as possible.
We generally recommend cleaning with a moist, fluff-free
cloth, moistened with pure water without the addition of any
cleaning agents; furniture polishes or similar.
If cleaning with a damp cloth proves not to be adequate,
careful use of a mild plastics cleaner without abrasive
additive is admissible on melamine surfaces. Wood polishes
must not be used on open-pored lacquered veneer surfaces
(oak, walnut, ash and bamboo).
This settles into the open pores, closes them and gives the
surface a greasy, glossy appearance after a while. The desired
semi-gloss and open-pored veneer appearance is ruined.
Furniture polishes available off-the-shelf can be used for
closed-pore lacquered surfaces (cherry, beech and maple).
They fill the finest of scratches in the lacquer and cover
them up relatively well.An enhanced glossy appearance of the
surface is difficult to prevent. Never use polishes contain-
ing silicon, caustic cleaning agents with ammonia additives,
DISPOSAL
Instructions for the disposal of Bene products can be found in
the sustainability report at: http://www.bene.com
Gottfried Fuchs
(Head of Group Engineering, Quality and Environmental Management)
DI (FH) Karl Zankl
(Department Head, Executive Furniture)
alcohol or softeners. The same applies for scratching cleaning
agents with abrasive additives. Glass and material surfaces
are to be cleaned in accordance with manufacturer’s instruc-
tions. Please contact Bene for information and documentation
on this matter.
Bene can not assume any liability for damage to surfaces
caused as a result of improper cleaning.