SP-7XE/F Full-Rise Scissor Lift
9
P/N 5900010 — Rev. B — June 2022
SP-7XE Series Lift components include:
•
Console
. Hosts the controls for the Lift (on top) and the Power Unit (inside). The connections for
the Hydraulic Hoses and the Air Lines connect to the Power Unit inside the Console.
•
Power Unit
. Provides Hydraulic pressure to the Hydraulic Cylinders, which they use to raise the
Platforms. Housed inside the Console. Connects to an external power source and to the Lift
Controls.
•
Hose Covers
. Cover the Air and Hydraulic Hoses.
•
Drive-up Ramps
. Used to drive on to or off of the Platforms. Not included with the SP-7XE
F
.
•
Hinged Section
. Hinges up when the Platforms are raised.
•
Fixed Section
. On the opposite end from the Hinged Section. Can be raised for installation, but
otherwise stays in place. Does not hinge up when the Platforms are raised.
•
Platforms
. Flat steel plates that raise and lower. The Platforms, or the Lift Pads on the Platforms,
make contact with the undercarriage of the Vehicle in order to raise and lower it.
•
Ramp Extensions
. Attaches to the Platforms, used for supporting Vehicles with long
wheelbases.
•
Bases
. The bottoms of the Lift. They hold the Scissor Legs, Hydraulic Cylinders, Air Cylinders,
Safety Locks, the holes for the Anchor Bolts. You anchor the Lift in place using the Anchor Bolts
holes in each Base.
•
Frames
. The combination of a Platform and a Base is a Frame.
•
Scissor Legs
. The parts of the Lift that raise and lower, powered by the Hydraulic Cylinders.
•
Hydraulic Cylinders
. Push the Platforms up to raise a Vehicle, move down to lower a Vehicle.
•
Safety Locks
. Hold the Platforms in place and consist of a latching mechanism and welded
blocks on each Lift Platform assembly. The SP-7XE/F has eight Safety Lock positions, which allow
you to select the right Platform height for your needs.
•
Air Cylinders
. Part of the Safety Lock Mechanism, use pressurized air to move the Safety Lock
Mechanism off the Safety Lock so you can lower the Lift. It is the user’s responsibility to provide an
air pressure supply (minimum 50 psi / 10 CFM, regulated to a
maximum
of 125 psi).
•
Lift Pads
. Rubber Pads that make contact with the Lifting Points on the Vehicle being raised.
Using the Lift Pads is optional. The Lift comes with four Lift Pads.
Summary of Contents for SP-7XE
