BendPak HDS-18E, Installation And Operation Manual

Page: 17 / 56

4. With the CABLES properly routed, hold the Sheaves in
position and install the SHEAVE PIN. (See Fig. 7.5)
5. Repeat the same procedure at the other end of the lift
starting with the bottom Sheave and Cable first. Be sure that
you install the Sheaves, Spacers and Pins in the same order as
they are removed.
6. Install the Sheave Pin Retaining Pin and Hair Pins though the
bottom of the Sheave Pin. (See Fig. 7.6)
17
DANGER !
DO NOT PROCEED unless visual confirmation is made
of ALL Safety Locks. ALL locks MUST be engaged before
proceeding. Failure to comply with these instructions may
result in severe personal injury or death. (See page 25.)
Fig. 7.6
Fig. 7.5