background image

Copyright © 2021 BendPak Inc. All rights reserved. 

2

 of 

20

 

bendpak.com

 

Quick Start Guide.

 Turf Maintenance Lift Kit, Quick Start Guide, Part Number 5900178, Revision A1, released 

April 2021. 

Copyright.

 Copyright © 2021 by BendPak Inc. All rights reserved. You may make copies of this document if you 

agree that: full attribution goes to BendPak Inc., you are not authorized to make changes to the content, you do 

not gain any rights to this content, and you will not use the copies for commercial purposes. 

Trademarks.

 BendPak, and the BendPak logo, are registered trademarks of BendPak Inc. All other company, 

product, and service names are used for identification only. All trademarks and registered trademarks mentioned 
in this manual are the property of their respective owners. 

Limitations.

 Every effort has been made to ensure complete and accurate instructions are included in this 

guide. However, product updates, revisions, and/or changes may have occurred since this guide was published. 

BendPak reserves the right to change any information in this guide without incurring any obligation for equipment 

previously or subsequently sold. BendPak is not responsible for typographical errors in this guide. You can always 
find the latest version of the 

Quick Start Guide for your product on the BendPak website

. 

Warranty.

 The BendPak warranty is more than a commitment to you; it is also a commitment to the value of 

your new product. Contact your nearest BendPak dealer or visit 

www.bendpak.com/support/

 for full 

warranty details. Be sure to register your warranty with BendPak. 

Safety.

 Your Turf Maintenance Lift Kit was designed and manufactured with safety in mind. Your safety also 

depends on proper training and thoughtful operation. Do not set up, operate, maintain, or repair the Lift without 
reading and understanding this manual and the labels on the unit; 

do not use your Lift unless you can do 

so safely!

 

Owner Responsibility.

 In order to maintain your product properly and to ensure operator safety, it is the 

responsibility of the product owner to read and follow these instructions: 

•  Follow all installation, operation, and maintenance instructions. 

•  Make sure product installation conforms to all applicable local, state, and federal codes, rules, and regulations, 

such as state and federal OSHA regulations and electrical codes. 

•  Read and follow all safety instructions. Keep them readily available for operators. 

•  Make sure all operators are properly trained, know how to safely operate the unit, and are properly supervised. 

•  Do not operate the product until you are certain all parts are in place and operating correctly. 

•  Carefully inspect the product on a regular basis and perform all maintenance as required. 
•  Service and maintain the unit only with approved replacement parts. 

•  Keep the manual with the product and make sure all labels are clean and visible. 

 

Only use the Lift and the Turf Kit if it can be used safely! 

Liability Information 

BendPak assumes 

no

 liability for damages resulting from: 

•  Use of the equipment for purposes other than those described in this guide. 
•  Modifications to the equipment without prior, written permission from BendPak. 

 

Modifying, disabling, overriding, or removing safety features. 

•  Damage to the equipment from external influences. 
•  Incorrect operation of the equipment. 

 

 

 

Summary of Contents for 5174042





















Reviews: