D .
SCAN LIST LOCKOUT
When function 5 is enabled (flashing), the
user will not be able to change thechannels
in the scan list. When disabled (steady),
the user can enter or delete channels from
the scan list. See “Change the Scan List”
in the Owner’s Manual.
E .
STORE GROUP ONE SETTINGS
Once each function l-5 is set as desired, you can store the changes,
discard the changes, or disable all 5 functions.
Press the
[CLR]
key to disable all Group One functions (steady).
Press the
[ENT]
key to store new Group One settings into memory
and advance to the next section.
Press the
[FCN]
key to advance to the next section without saving
changes or if the new settings are only to be cloned, not stored
locally.
CHANNEL 0 GROUP TWO SETTINGS
After Group One functions are set, the
LCD will display
PRG
2-12345 for Group
T w o f u n c t i o n s . A s w i t h G r o u p O n e
functions, the enabled function number
will flash. The disabled functions remain
steady.
A.
USER CODE GUARD SELECTION
When function 1 is enabled (flashing) the
user will be able to press the keyboard to
independently select the Code Guard
values that are programmed into Channels
1 through 9 whileoperatingon any Channel
1 through 14. When disabled the user will
be unable to use the keyboard for Code
Guard selection.
Keyboard Programming
9
Summary of Contents for E Series Lawrence
Page 1: ......
Page 27: ...NOTES 26 BENDIX KING...
