Bender ISOMETER isoHV525, Manual

Page: 8 / 52

Important information
8 isoHV525_D00297_04_M_XXEN/05.2018
1.2.3 Field service
On-site service for all Bender products
 
Commissioning, parameter setting, maintenance, troubleshooting for Bender
products
 
Analysis of the electrical installation in the building (power quality test, EMC test,
thermography)
 
Training courses for customers
Telephone : +49 6401 807-752**, -762 **(technical issues)/
+49 6401 807-753** (sales)
Fax : +49 6401 807-759
E-Mail : fieldservice@bender-service.com
Internet : www.bender-de.com
* Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC+1)
** Mo-Thu 7.00 a.m. - 8.00 p.m., Fr 7.00 a.m. - 13.00 p.m.
1.3 Training courses
Bender is happy to provide training regarding the use of test equipment.
The dates of training courses and workshops can be found on the Internet at
www.bender.de -> Know-how -> Seminars.
1.4 Delivery conditions
Bender sale and delivery conditions apply. For software products, the "Softwareklausel
zur Überlassung von Standard-Software als Teil von Lieferungen, Ergänzung und Ände-
rung der Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektro-
industrie" (software clause in respect of the licensing of standard software as part of
deliveries, modifications and changes to general delivery conditions for products and
services in the electrical industry) set out by the ZVEI (Zentralverband Elektrotechnik-
und Elektronikindustrie e.V.) applies. Sales and delivery conditions can be obtained
from Bender in printed or electronic format.
1.5 Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the contents
of the package with the delivery documents. In the event of damage in transit, please
contact Bender immediately. The devices must only be stored in areas where they are
protected from dust, damp, and spray and dripping water, and in which the specified
storage temperatures can be ensured.